This machine is used for filling and sealing plastic/laminated Alu tube auto.
1.Transmission parts enclosed in the platform below the safe, reliable, non-polluting; filling and sealing part of the installation within the platform above a semi-closed static-frame visual plexiglass cover, easy to observe, easy to operate, easy to maintain;
2)Main parts adopt import parts,PLC control system(Siemens),Color touch screen display(Siemens),invertor:(Panasonic,Japan),low electric applicator(Omron),Pneumatic parts(Airtac ,Taiwan),motor:(STS,Taiwan)
4)Automatically feeding tube into tube holder
5)The photoelectric target-aiming working station employs accurate detector and marching type motor,ensuring the tube design at the correct position.
6)Filling nozzle enters tube inside to fill.As it fills it will moves up and prevent material from over flowing and spilling.
Has auto cutting tube tail function when finishing fill the material into the tube
7)No tube no filling,Sealing temperature adopt (Leister hot air gun) inside heating for the tail of tube and cooling device for out of tube
8)Automatically printing the character code on the tube bottom
9)Has overload protection
10)Has accounting and auto stop machine when reach the number
11)With Sensor to auto detect the printing mark on the tube,can auto adjust the tube position.
9 work stations,40-60pcs/min,