Coating machine maintenance and care

- Jan 10, 2018-

1, gearbox lubrication oil and rolling bearing cavity should be replaced regularly (usually not more than six months)

2, such as long-term coating pan should not be cleaned, and coated with oil on its surface.

3, the spray gun in the use of water after each class should be washed with clean water pressure to prevent clogging, such as the phenomenon of clogging spray gun according to the instructions will be open sprinkler, with a needle to clear the muzzle residue.

4, in order to ensure that the gear box worm gear transmission conditions meet the operating temperature of the box shall not exceed 50 ℃.

5, worm shaft seal oil seal should be regularly checked (no more than six months).

6, the machine must be reliably grounded, the grounding resistance should be ≤ 4Ω.

7, shall not be dismantled electrical appliances.